Hydrostatic Tank Contents Gauge, 0-100%

In stock
Not rated yet
  • £158.40 incl. VAT
  • £132.00 + VAT
  • Diesel (EN590)
    Gas Oil (BS2869)
    HVO (EN15940)
    Kerosene (BS2869)
    Bio Diesel B100 (EN14214)
    Jet A1
    AdBlue (ISO22241)
    Optispray (ISO22241)
    Suitability: Diesel (EN590)
Qty:  
OR

Hydrostatic contents gauge suitable for tanks with both cylindrical and horizontal cross-sections. Compatible with tanks ranging from 900 to 3000mm in depth.

Displays the remaining tank contents as a percentage in increments of 2% with an overall accuracy once installed and calibrated of ± 3%

Simple to install, completely pneumatic actuation, requires no electrical supply or maintenance. Installing the gauge is not difficult, as most plastic and steel tanks will already have a pre-cut aperture or tapping, in the unlikely event that this is not the case an industry-standard 32mm diameter hole will need to be cut into the tank. 

The sensor which is situated in the tank is connected to the wall-mounted readout (display) by a narrow 4mm diameter capillary tube. 20m of the interconnecting capillary tube is supplied which can be cut to length.